This is my first real project with the pocket gameboy. i wanted to see what i could fit in it and there is actually a large amount of space.
in this pocket there is a biverted backlit screen with purple backlight, also a NiCad rechargable battery and pre pot prosound.
i fitted a 25way break out socket on the bottom that fits in with the standard of all my other gameboys. this means i can use my Nes controller on it, or take out the screen data etc. it shows also that the pocket gameboy works just like the DMG and so its possible to mix and match parts easily.
VIDEO is here:
the LCD pins from the CPU are:
41 LCD Control
42 LCD Data Latch
43 LCD Horizontal Sync
44 LCD data 0
45 LCD data 1
46 LCD Clock
47 LCD Alternate signal
48 LCD Vertical Sync
but you wont be able to fit a DMG screen because you would have to remove the screen from the board and so far i have found that impossible.
as for the controller, if you look there is a set of 6 traces under the graphics chip, the one nearest the top is:
P15 OUT
P14 OUT
